Unexpected excavator goes underwater in mud

You have to keep up with maintenance if you work around the clock. According to Kent Pellegrini, Caterpillar excavator product application specialist, “The focus should be on machine joints, such as contact with water: “Every part of the machine that comes into contact with water requires daily maintenance. It is best to use lithium grease and sealed bearings. Under unfavorable circumstances, the use of an automatic lubrication system may be required. After hours of use, the bucket’s rotation should be checked constantly, and you should pay close attention to see if the oil on the pins is starting to dry out.

Choose an environmentally friendly lubricant. In fresher and tougher situations, “lithium lubricants offer the potential to survive use underwater,” claims Pellegrini. Depending on the situation, “this fat does well and can be at least as good as a woman’s job.” In addition, the frequency of lubrication must be increased, especially when the machine dispenses material in wet and hard conditions. According to Pellegrini, “Oil comes into contact with it, causing lubrication to run off the ends of the bushings and pins.”
The only source that knows when to work, when it needs lubrication, is the operator. The engine connections of the bucket and rod pins may need to be lubricated twice a day. In cases where equipment is regularly operated underwater, an automatic lubrication system is an excellent way to maintain constant lubrication of pins and bushings.

With an amphibious mesh bottom, you also have to be a little less forceful when digging. “I can be aggressive and I definitely will when I’m outdoors on a standard 60-foot backhoe,” adds Faxon. “You can’t use an amphibic spring with that kind of aggression. You only get half the product just because of the location. That’s because you’re floating, which provides stability. You float even when on the ɑ Morsh. It’s collapsible.”

Leave a Comment